Scroll Up Gadget
 
FLOWMETERS

 

 

WOLF - PADDEL FLOWMETER 
 
• Hi-precision and good price/performance ratio
• Variants suitable for fitting into control units and 
equipped with hi-pressure brass flanges
• Operating status LED
• Sapphire paddle pin to minimize rotational friction 
and maximize sensitivity and accuracy
• Paddle assembly equipped with ‘TWIST’ system for 
either cleaning or replacing operations without the
need of any tools
• Fully sealed and watertight electronic sensor
• Rates from 2.5 to 800 l/min
• Typical error 1% of full scale
• Operating pressure: up to 40 bars (depending on model and setup)
• Power supply 4.5 to 26 Vdc
• 0-12 Vdc pulse output with frequency proportional 
to rate
• Max. consumption: 25 mA
• Parts in contact with the fluid are made of fiberglass 
and Delrin ®  reinforced Nylon
 
⇒ available in the versions 5÷100l and 10÷200l


 

ORION 2 - ELECTRO MAGNETIC FLOWMETER 
 
• No mechanical moving parts inside the pipe
• Performances independent from fluid density and viscosity
• Low sensitivity to turbulence
• High precision
• Low maintenance
• Typical error: 0,5% full scale
• Working pressure: up to 40 bar
• Power supply: 11 to 15 Vdc
• 0-12 Vdc pulse output with frequency proportional to rate
• Max consumption: 300 mA
• Output only by flowing fluid
• Flanged fittings
• Parts in contact with fluid made of polypropylene 
and Stainless Steel 316
 
⇒ available in the versions 5÷100l and 10÷200l


 

digiWOLF - PADDLE FLOWMETER - DIGITAL DISPLAY 
 
• High accuracy
• Programmable multilingual graphic display
• Available either with external battery (12 Vdc) or inside cell power supply
• Display snap-on cover
• Body with fork connectors for flexible connection layout
• Sapphire paddle pin to minimize rotational friction and maximize sensitivity and accuracy
• Paddle assembly equipped with ‘TWIST’ system for either cleaning or replacing operations without the need of any tools
• Fully sealed and watertight electronic sensor
• Rates from 10 to 800 l/min
• Instant rate display (l/min)
• Supplied fluid display
• Unit of measurement: liters or US Gallons
• 2 separately resettable counters
• Programmable flow threshold alarm (min./max.)
• Assisted constant setting procedure
• Characteristic mistake: 1% of the full scale
• Operating pressure: up to 20 bars*
• Parts in contact with the fluid are made of fiberglass 
and Delrin ® reinforced Nylon
 
⇒ available in the versions 5÷100l ,10÷200l and 40÷800l


 


 STANDARD AXIAL-FLOW TURBINE FLOWMETER

Designed for measuring highly corrosive and aggressive liquids, also under low pressures.

  • FLOW RATE  : 3/30L'
  • MAX PRESSIRE : 20b
  • SUPPORTS : GRAPHITE
  • THREAD SIZE : 1/2"
  • MATERIAL : NYLON

 

  RAPID CHECK - IXEF BODY with THREADED FLANGES

REMOVABLE TURBINE FLOWMETER. flowmeter with a stainless steel axial turbine. Flowmeter body with removable male threaded flanges and flanged hosetail. Removable turbine unit and sensor. Sinusoidal-wave, square-wave or 4-20 mA sensors. 

  • MATERIAL : IXEF
  • THREAD SIZE : 1"
  • FLOW RATE : 10/100L'
  • MAX PRESSURE : 50b
  • SUPPORTS : CERAMIC

RAPID CHECK UNIT - IXEF BODY

Connectable to all axial turbine Rapid Check flowmeters.
It allows simple and rapid disassembly so that the moving parts can be inspected. High and low volume versions can be mounted on the same flowmeter body so that it can be used for both applications.

 

  • THREAD SIZE : 1"F
  • FLOW RATE : 10/100L'
  • SUPPORTS : Adjustable Sapphire Bearing with Steel Shaft


 

  RAPID CHECK - NYLON BODY WITH THREAD

REMOVABLE TURBINE FLOWMETER. The Rapid Check flowmeter series is extremely practical when carrying out maintenance operations, and maintains the precision of the standard turbine flowmeters. It is possible to simply unscrew the body to remove, check, and (if necessary) clean the stainless steel axial-flow turbine. A single removable body contains a turbine (high or low volume, with stainless steel, ceramic, ruby and adjustable sapphire bearings) and a 4-20 mA sinusoidal-wave or square-wave sensor. 

  • MATERIAL : NYLON
  • THREAD SIZE : 1/2"
  • FLOW RATE : 3/20L'
  • PRESSURE 20b
  • SUPPORTS : CERAMIC


 

 

  

© Copyright 2013 AgTech Hawkes Bay Ltd. All rights reserved.

 
Login

Sign-up to AgTech Hawke's Bay Ltd and create your universal Woogloo ID

Your details

Your login details

Your address


Is your address not being found?

Company

Company address

Yes No


To register on the AgTech Hawke's Bay Ltd website you either need to use your
exisitng Woogloo ID or create a new one (see below).

Sign Up

Why sign up?

  • Get access to Registered User's priviledges, which may include hidden pages, special features and special pricing, if they exist, on this website.
  • Get access to all sites powered by Woogloo V3 without having to enter your details everytime.

Login Error

Forgot your password?

Enter your email address below and click 'Reset Password' Button




What is a Woogloo ID

Logging in...